top of page
Urinal flusher sensor flusher T-719-U

Urinal flusher sensor flusher T-719-U

  • Continuous sensing for more than 7 seconds, leaving for 2 seconds after use, and flushing for 5-13 seconds (adjustable). The indicator light flashes once when detected.
    When the battery power is low, the indicator light flashes continuously to remind you to replace the battery. When the battery power is about to run out, the water is turned off and the system is shut down.
    Sensing distance 50-70 cm.
    With manual function.
    The horizontal angle of the electric eye can be adjusted 360º and is applicable to left and right water inlets.
    Battery life: 2-3 years (50,000 times per year).
    Water supply pressure: 0.5kgf/cm²-7kgf/cm²
0/15
Quantity
  • Technical specifications

    Installation

    Floor, wall (any angle is acceptable).


    Product Appearance

    Appearance material: Chrome plating
    Internal material: brass, plastic steel.


    size

    Overall height: MAX-440mm (adjustable)
    Height from installation hole to toilet outlet: MAX-300mm (adjustable)
    Total length from wall to electric eye: MAX190mm (adjustable)
    Applicable aperture: PF 1"


    Sensing element

    Sensing distance: 20-30cm (hand measurement)
    Standby power saving mode
    Low Voltage LED Flashing Device (Battery Powered)
    When the battery power is exhausted, turn off the water and shut down the system (battery type)


    Solenoid valve specifications

    Diaphragm type water hammer resistance valve group
    Water-saving solenoid valve group

     


    Support power specifications

     

    Battery Specifications

    AA alkaline batteries (4pcs)

  • Product packaging specifications

    • Manual automatic sensor flusher (tread water)
      Wall flange cover
      Battery
      Wall flow valve 1"
      Water inlet pipe 1"
      Outlet pipe 1"
      Outlet nut 1"
      Drain flange cover 1"
bottom of page