Stainless steel sink-wall sensor faucet UT-1401
- The water comes out when the sensor is on, and the water is turned off when the hand is removed. The water will automatically shut off after one minute of continuous water flow.
When the battery power is low, the LED light flashes to remind you to replace the battery.
When the power is about to run out, the water is turned off and the system is shut down at the same time.
Sensing distance within 10 cm.
Battery life: 2-3 years (50,000 times per year).
Water supply pressure: 0.5kgf/cm²-7kgf/cm²
Use water temperature: 1℃-60℃
Warm and cold
0/15
Technical specifications
Installation
Wall mounted basin
Stainless steel wall sink
Product AppearanceAppearance material: Chrome plating
Internal material: Brass
sizeOverall length: (small U tube) 130, (medium U tube) 160, (large U tube) 190, (L tube) 230mm
Applicable aperture: 35mm
Sensing elementSensing distance: 15-25cm (hand measurement)
Standby power saving mode
Low Voltage LED Flashing Device (Battery Powered)
When the battery power is exhausted, turn off the water and shut down the system (battery type)
Solenoid valve specificationsDiaphragm water hammer valve group
Water-saving solenoid valve group
Built-in filter
Support power specificationsBattery Specifications
AA alkaline batteries (4pcs)
Plug specifications
Transformer AC220V to DC6VProduct packaging specifications
- Sensor faucet
Outlet pipe
Solenoid valve with built-in filter
Transformer or battery
(Hot and cold water) 30cm steel hose
(Hot and cold water) check valve
(Optional accessories) Triangular valve
- Sensor faucet
