top of page
Manual sensor faucet T-818R

Manual sensor faucet T-818R

  • The water comes out when the sensor is on, and the water is turned off when the hand is removed. The water will automatically shut off after one minute of continuous water flow.
    With manual water boiling function.
    When the battery power is low, the LED light flashes to remind you to replace the battery.
    When the power is about to run out, the water is turned off and the system is shut down at the same time.
    Sensing distance is within 17 cm.
    Battery life: 2-3 years (50,000 times per year).
    Water supply pressure: 0.5kgf/cm²-7kgf/cm²
    Use water temperature: 1℃-60℃
Warm and cold
Quantity

  • Technical specifications

    Installation


    Product Appearance

    Appearance material: Chrome plating
    Internal material: Brass


    size

    Overall height: 135mm
    Distance from installation hole to water outlet: 130mm
    Applicable basin aperture: 35mm-40mm


    Sensing element

    Sensing distance: 14-16cm (hand measurement)
    Standby power saving mode
    Low Voltage LED Flashing Device (Battery Powered)
    When the battery power is exhausted, turn off the water and shut down the system (battery type)


    Solenoid valve specifications

    Diaphragm type water hammer resistance valve group
    Water-saving solenoid valve group
    Built-in filter

     


    Support power specifications

     

    Battery Specifications

    AA alkaline batteries (4pcs)

    Plug specifications
    Transformer AC220V to DC6V

  • Product packaging specifications

    • Manual automatic sensor faucet
      Fixing accessories
      50cm steel wire hose
      Anti-water hammer solenoid valve with built-in filter
      Transformer or battery
      (Hot and cold water) 30cm steel hose
      (Hot and cold water) check valve (2pcs)
      (Hot and cold water) check valve
      (Optional accessories) Triangular valve

Related Products

bottom of page